SEAL+RENEW RUST & ROT CONTROL REDUCES RUST, ROT AND WEAR

(1)

Flush Your Cooling System and Change Your Coolant Every 24-36 Months

• Drain the old coolant.
• Add a bottle of Cooling System Flush and fill cooling system up with plain water.
• Run the engine for about 10 minutes to circulate the water & Cooling System Flush.
• Turn on the heater and blower fans and run them for a few minutes.
• Stop the engine, drain the water & flush, and refill with just plain water. Then run the engine again and turn on heater and blower fans. Then drain the water again.

(2)

Add new coolant and add one or two bottles of Radiator Rust Inhibitor and Water Pump Lubricant

(3)

Brush Synergy+100 Onto Every Accessible Hose and Clamp (especially around the clamps and hose ends)

(4)

Inspect Hoses At Every Oil Change and Brush Additional Synergy+100 Onto Every Accessible Hose